A platform for initial testing of multiple camouflage patterns

来源 :防务技术 | 被引量 : 0次 | 上传用户:wyn6098
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The human visual system is still an important factor in military warfare;military personnel receive training on effective search strategies,and camouflage that can effectively conceal objects and personnel is a key component of a successful integrated survivability strategy.Previous methods of camouflage assessment have,amongst others,used psychophysics to generate distinctiveness metrics.However,the population from which the human observers are drawn is often not well defined,or necessarily appropriate.In this experiment we designed a new platform for testing multiple patterns based on a camouflaged object detection task,and investigate whether trained military observers perform better than civilians.We use a two-alternative forced choice paradigm,with participants searching images of woodland for a replica military helmet displaying Olive Green,Multi Terrain Pattern,US Marine Pattern or,as a conspicuous control,UN Peacekeeper Blue.Our data show that there is no difference in detection performance between the two observer groups but that there are clear differences in the effectiveness of the different helmet colour patterns in a temperate woodland environment.We conclude that when tasks involve very short stimulus presentation times,task-specific training has little effect on the success of target detection and thus this paradigm is particularly suitable for robust estimates of camouflage efficacy.
其他文献
纳米胶体射流是抛光加工半导体材料的新型工艺方法,其中射流抛光液的分散稳定性对抛光效果有较大影响.以直径为10 nm的CeO2为磨料,选取乙醇体积分数、聚乙烯吡络烷酮(PVP)质量分数和抛光液pH值为实验因素,利用图像灰度值法表征抛光液的分散稳定性,分析抛光液各组成参数对其分散稳定性的影响规律.利用Box-Behnken响应面法对纳米CeO2胶体抛光液的分散稳定性条件进行优化.研究结果表明,纳米CeO2胶体抛光液的最优分散条件为乙醇体积分数61%、PVP质量分数3%、抛光液pH值为10.在此最优条件下,制备
位错可以通过缩短少数载流子寿命而严重限制多晶硅太阳电池的转换效率,随着对高转换效率的追求,研究多晶硅位错的重要性也随之增加.在介绍现有半导体晶体CRSS和HAS位错模型的基础上,归纳了定向凝固法生长多晶硅中应力、晶界、杂质、过冷度对位错形成的影响机制与缺陷腐蚀和原位检测等多种位错表征方法.重点阐述了控制固液界面形貌、籽晶、掺杂、硅锭制备工艺、硅片退火等技术对减少与抑制多晶硅位错的影响.最后,针对位错模型、位错表征以及多晶硅生长过程中位错的抑制和生长后位错密度降低技术进行了展望.
通过实验优化了方形基片喷雾涂胶工艺.以AZ6130光刻胶作为研究对象,实验过程中在改变胶液体积流量和氮气压力条件下,采用二流体喷头对方形基片进行喷涂,使用显微镜和粗糙度轮廓仪观察并测量其表面形貌.实验结果表明:在不改变其他实验条件下,氮气压力为0.03 MPa时,随着胶液体积流量从0.6 mL/min增加至2.2 mL/min,胶膜厚度从5.3 μm增加至19.0 μm,膜厚均匀性从3.5%增加至22.6%;胶液体积流量为1.0 mL/min时,随着氮气压力从0.01 MPa增加至0.09 MPa,胶膜厚
针对某单片微波集成电路(MMIC)阻性衰减器断路故障进行了失效分析.开封后,利用扫描电子显微镜(SEM)、能谱仪(EDS)和聚焦离子束(FIB)等对失效样品进行检测.经检测发现W电阻薄膜断裂导致器件断路失效.W电阻薄膜断裂的原因是W-Au异质金属直接接触的区域暴露在空气中形成腐蚀原电池发生电化学腐蚀.利用质量分数3%的NaCl溶液对同批次器件进行腐蚀实验,复现了失效模式.检测和复现实验证明了该器件的失效机理为基于异质金属接触的电化学腐蚀.
针对国内半导体检测机构老炼试验大规模依赖于人工的现状,研制了一种基于TCP/IP网络的分布式半导体器件老炼试验电源监视系统,介绍了系统结构和功能的设计方案,详细说明了具体实现方式和关键技术,包括多类型电源通信兼容性、接口转换与电磁隔离、通信速率优化和属性化任务管理等相关实现方案.该电源监视系统提高了半导体器件老炼试验的信息化水平,在降低成本的同时显著提升了试验质量,通过该系统可以监测器件正常老化、电源功能异常和夹具状态异常等试验过程数据,为设备维护和夹具设计提供了依据.该分布式老炼试验电源监视系统已应用于
传统的SiC模块常采用平面布局,各芯片的工作电路存在明显的不对称性,芯片间存在源极侧公共支路,支路上的耦合电感将导致严重的动态电流不均衡.首先对源极侧公共支路耦合电感对并联芯片间动态电流分布的影响进行了详细分析,建立了描述动态不均衡电流和源极侧公共支路耦合电感关系的解析模型,揭示了该电感对芯片动态均流的影响机理.随后,基于该模型提出了一种立体的多芯片并联圆周布局,该布局能够消除并联芯片间的电流耦合效应,并且提高了源极寄生电感的一致性.最后,仿真与实验结果表明,所提出的新型立体圆周布局下,并联芯片间的动态电
Q-switched lasers have occupied important roles in industrial applications such as laser marking, engraving, welding, and cutting due to their advantages in high pulse energy. Here, SnS2-based Q-switched lasers are implemented. Consid-ering that SnS2 inhe
A refractive index (RI) sensor based on perfluorinated plastic optical fiber (PF-POF) is introduced in this paper. The PF-POF as multi-mode fiber was side-polished (SP) to form a macro-bending single-mode-multimode-single-mode (SMS) structure. Both ends o
The aim of this study is to develop a reliable method to determine optical constants for 3D-nanonetwork Si thin films manufactured using a pulsed-laser ablation technique that can be applied to other materials synthesized by this tech-nique. An analytical
In this paper,the kerosene/air rotating detonation engines(RDE) are numerically investigated,and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation,instabilities,a