Synthesis of CaWO4:Eu3+ phosphor powders via ethylene glycol route and its optical properties

来源 :Journal of Rare Earths | 被引量 : 0次 | 上传用户:lz251667032
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Eu3+ doped CaWO4 with tetragonal system were prepared at comparatively low temperature (125 ?C) in ethylene glycol medium. The phosphor was further investigated by X-ray diffractometer (XRD), photoluminescence spectrophotometer (PL), Fourier transform infra red (FT-IR) spectroscopy and transmission electron microscopy (TEM). XRD analysis indicated a decrease in the unit cell volume of CaWO4 with increasing Eu3+ ion concentration. It indicated the homogeneous substitution of Ca2+ ions in CaWO4 by the Eu3+ ions. TEM images showed that the particle size ranged from 20 to 200 nm and it could extend the application of the nanoparticles. The photoluminescence study showed that the intensity of electric dipole transition (5D0→7F2) at 614 nm dominated over the magnetic dipole transition (5D0→7F1) at 592 nm. The optimum concentration of Eu3+ for the highest luminescence was found to be 20 at.%. The as prepared samples were found to be dis-persible in water and methanol. Eu3 + doped CaWO4 with tetragonal system were prepared at comparatively low temperature (125 ° C) in ethylene glycol medium. The phosphor was further investigated by X-ray diffractometer (XRD), photoluminescence spectrophotometer (PL), Fourier transform infra red XRD analysis showed a decrease in the unit cell volume of CaWO4 with increasing Eu3 + ion concentration. It shows the homogeneous substitution of Ca2 + ions in CaWO4 by the Eu3 + ions. TEM images showed that the particle size ranged from 20 to 200 nm and it could extend the application of the nanoparticles. The photoluminescence study showed that the intensity of electric dipole transition (5D0 → 7F2) at 614 nm dominated over the magnetic dipole transition (5D0 → 7F1) at 592 nm. The optimum concentration of Eu3 + for the highest luminescence was found to be 20 at.%. The as prepared samples were found to be dis-persible in water and methanol.
其他文献
如采用类似注塑通用塑料的方法来注塑各种工程塑料,会遇到各种问题。注塑企业最常犯的错误是采用类似聚丙烯的加工方法来注塑各种工程塑料。聚丙烯具有很好的剪切流变特性,不
众所周知,注塑过程涉及一门技艺。虽然注塑成型的某些方面仍然有些神秘,但是人们希望通过采用科学的方法,最大限度地降低注塑过程中遇到的困难,科学排除注塑故障。如表 As w
本系列文章的前三部分(1-2部分刊于第4期,3部分刊于第5期)主要分析了造成成型制品变小的影响因素。但是环境因素也会造成制品尺寸的变化。材料吸湿性对制品尺寸的影响(4) Th
挤出加工过程中经常遇见斑点问题,避免斑点需要采取双管齐下的方法:首先需预计进厂的原料中存在有多少斑点;然后在挤出加工过程中将造成的这些斑点降至最少。 Extrusion pro
2014年,德国工业4.0再次像巨浪一样,获得众多国内业内人士争先恐后的响应,一时成为新时代产业变革的新趋势。也见,德国不遗余力地推广工业4.0,其现象的背后蕴含着深层次的战略用意
期刊
有限元分析是一种计算机与力学分析相结合的分析方法,该方法的应用越来越受到工程技术领域的欢迎和认可.本文以管道四公司科研站研发的挖掘机铲斗吊钩为例,采用Pro/E软件的ME
SABIC携“筑·光概念房”,为实现“中国梦”提供解决方案rn沙特基础工业公司(SABIC)在“C hinaplas2013国际橡塑展”上隆重展出“筑·光概念房”(Archi-Light Concept House)
阿克苏诺贝尔公司于2013年6月6日表示,它已经与苏威公司签署了一项为期三年的协议,据此,阿克苏诺贝尔将增加在其油漆和涂料中使用可再生原材料,两家公司建立了合作伙伴关系。
(中国上海,2013年7月29日)全球领先的化工公司巴斯夫将在上海投资兴建一座年产10万吨的Ultramid(R)生产装置.预计该装置将于2015年建成投产.rn巴斯夫亚太区总裁(职能管理)、
利用2种石油污染土壤在不同络合剂条件下,研究络合Fe2+催化H2O2对石油烃(TPH)和有机质(SOM)去除率的影响,观察了不同条件下土壤pH和温度的变化.研究表明柠檬酸络合Fe2+催化H2