Copper has been used as a strengthening element in newly developed Fe-Cr-Ni type austenitic heat resistant steel for inducing Cu-rich phase precipitation to mee
Ferroelectric Bi3.15Nd0.85Ti3O12 (BNT) thin films have been grown on Pt/Ti/SiO2/Si substrates at 750 ℃ by a chemical solution deposition method using SrTiO3 (S
The zirconia-doped mullite gel fibers were prepared via a sol-gel method.The thermal behaviors of the gel fibers during pyrolysis were investigated by means of
NiCrAlY bond coat was prepared by HVOF (high-velocity oxygen fuel) spray on nickelbased superalloy.Surface treatments like grit-blasting,shot-peening and vacuum
The 3 mol% yttria stabilized tetragonal zirconia polycrystals (3Y-TZP) powder had three particle size distributions,while the fine one was lower than 100 nm.The