论文部分内容阅读
1.上紧联动器、转击器和制音器的所有螺丝。2.松弛前档键孔和中档键孔的左右移动幅度:前者为0.3mm后者为0.2mm;松弛中销孔:使键子自由滑落。
1. Tighten all the screws of the linkage, swinger and damper. 2. Slack front shift keyhole and mid-range keyhole left and right range of movement: the former is 0.3mm and the latter is 0.2mm; slack pin hole: the key to free slide.