论文部分内容阅读
苏联建筑工业部的专家们推荐一种简便有效的,既能改良混凝土工艺性能,又能减少水泥用量的方法,利用电离器使水中饱和阴离子,再用这种经过电离的水搅拌混凝土。这种方法在很大程度上可以加速水泥颗粒的吸水过程,提高水泥的水化作用程度,从而使混凝土强度迅速提高。在稳定电场作用范围内溶解阳极铜,结果产生电离作用。电离器是呈管状的金属箱(阴极),它经过整流器接入交流电网。根据水的含盐量确定其电流强度(电压在36伏以下时,为6～12安培)。为了稳定电流强度,在电离器的电源部分要安装监测仪
Experts from the Soviet Ministry of Building Industry recommend a simple and effective method that can both improve the performance of concrete and reduce the amount of cement. The ionizer can be used to saturate the anion in the water and then use this ionized water to agitate the concrete. This method can accelerate the water absorption process of the cement particles to a large extent and increase the degree of hydration of the cement, thereby rapidly increasing the strength of the concrete. Anodic copper is dissolved in the stable electric field, resulting in ionization. The ionizer is a tubular metal box (cathode) that is connected to the AC grid via a rectifier. The current intensity is determined based on the salt content of the water (6-12 amperes below 36 volts). In order to stabilize the current intensity, a monitor must be installed in the power section of the ionizer