论文部分内容阅读
目前我国有些地区根据交通法规GB7258—87的规定,汽车必须设置危险闪光报警灯,但是国产汽车,如BJ212、EQ140、CA141等车型均未有此装置,按装时,需要2×43CP的闪光器;原车上的43CP和库存的43CP闪光器要报废,浪费很大。为此笔者在原车上只加一只43CP的闪光器和一只双刀单掷开关,简易单易行,效果较好,同行们不访试一试。接线如图,原车闪光信号电路不动,在一适当位置上装上43CP闪光器和危险报警
At present, some areas in China according to traffic regulations GB7258-87 requirements, the car must be set to a dangerous flashlight warning lights, but domestic cars, such as BJ212, EQ140, CA141 and other models do not have this device, when installed, requires 2 × 43CP flasher 43CP flashes on the original car and 43CP flashes to be scrapped, a lot of waste. To this end I only add a 43CP flasher and a single pole single throw switch in the original car, simple and easy, the effect is better, colleagues do not visit to try. Wiring diagram, the original car flash signal circuit does not move, in a suitable location to install 43CP flasher and danger alarm