论文部分内容阅读
28.将手动阀杆轴插入自动变速器壳中,再将手动阀杆及护盖装到轴上,然后如图101所示将弹簧销敲入至定位。移动护盖罩住弹簧销,并将其定位。29.安装驻车杆、驻车爪、支轴销、弹簧及凸轮板。注意应确认杆有凸轮板(图102)。30.如图103所示,安装新的O形环到节流阀拉索。31.如图104所
28. Insert the manual valve stem into the automatic transmission case, install the manual valve stem and cover onto the shaft, and knock the spring pin into place as shown in Figure 101. Move the cover over the spring pin and position it. 29. Install parking pole, parking pawl, fulcrum pin, spring and cam plate. Be sure to confirm that the lever has a cam plate (Figure 102). 30. Install a new O-ring to the throttle cable as shown in Figure 103. 31. As shown in Figure 104