大力推进工业园区建设

来源 :浙江政报 | 被引量 : 0次 | 上传用户:dfhdgfhdgf
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
多年来,在省委、省政府的正确领导下,各级各部门和各园区管委会自觉服从国家经济发展大局,认真贯彻落实国家和省的各项方针政策,大力推进工业园区建设,取得了较好的成绩。但是,我们也应该清醒地看到,工业园区发展中也存在着一些矛盾和问题。主要是工业园区间的发展不平衡,园区产业层次不够高,园区产业集聚发展水平仍有待提高。各级、各部门应该看到,当前,世界经济保持较快增长,经济全球化深入发展,全球产业结构调整和国际资本流动进一步加快,产业转移的重点也已由劳动密集型产业转向资本和技术密集型产业。国际 Over the years, under the correct leadership of the provincial party committee and the provincial government, the administrative departments at all levels and the parks themselves have subordinated themselves to the overall national economic development and conscientiously implemented all the guidelines and policies of the state and the province, vigorously promoted the construction of the industrial park, A better result. However, we should clearly see that there are also some contradictions and problems in the development of industrial parks. Mainly the imbalance between the development of industrial parks, industrial parks is not high enough, the park industrial agglomeration level of development needs to be improved. All levels and all departments should see that at present, the world economy maintains rapid growth and the economic globalization develops in depth. The adjustment of the global industrial structure and the flow of international capital have further accelerated. The emphasis of industrial transfer has also shifted from labor-intensive industries to capital and technology Intensive industry. International
其他文献
1975年11月苏联列宁格勒焊接技术展览会展出一台OB—1098型气阀半自动堆焊机,这台焊机用于堆焊直径20~60毫米的气阀,也可堆焊直径400毫米的气阀。凝固法堆焊气阀的原理如下:
在均匀介质情况下,地震波被认为是一种正弦脉冲波,而在非均匀介质情况下,地震波可用傅氏级数或傅氏积分来表示。基于这种认识,我们首先以对称正弦脉冲波模拟正常反射波,再由
现已做出的标准系列化的大型组合夹具(槽16mm),是为加工大型零件(重量达三吨)使用的。 为了使大型元件本身的相互联结以及在基础板上紧固被加工零件,在基础板、支承和其他元
目前,黑龙江省各地(市)、县农业部门都积极实施化解村级债务工作,解开村集体经济组织的债务链。在化解村级债务的工作中,有几个问题应引起我们高度重视。一、防止村集体经济
本文介绍了在“钳工操作技能”实习教学过程中,通过利用“五勤法巡回指导、观摩指导、操作姿势形成的五因素、凸弧法锉平面、质量意识、工艺意识、安全文明生产习惯培养”方
本刊讯 2002年西部地区注册会计师(资产评估)协会秘书长协作会议于2002年7月19~21日在贵州召开。来自西部地区12个省、自治区、直辖市的代表参加了会议。会议围绕“乘西部开发东
目前,地下水资源勘察级别宜按《供水水文地质勘察规范》TJ27-78(简称《规范》,下同)第132条的要求,即水文地质条件的研究程度;动态观测时间的长短;计算所引用的原始数据和参
16α,17α-环氧-16β-甲基-△~5-3β-羥基孕甾烯-20酮(Ⅱ)经铝氢化鋰还原,得化合物3β,20β,17α-三羟基-16α-甲基-△~5-孕甾烯(Ⅶ_a)、3β,20α,17α-三羟基-16α-甲基-△~
浸渍磷化前的表面制备一般说来,热轧钢在浸渍磷化前要除去氧化皮,最常用的方法是酸洗。但是工厂的经验表明,出广的酸洗及涂油热轧钢会严重降低磷化处理的质量。 Surface Pr
在梁赞有色冶金工厂的主要工序中采用了含硫酸盐和金属氟化物杂质的硫酸腐蚀溶液,气体含硫化物,氟化物和二氧化碳,氟,氯以及硫酸蒸气。由于材料快速腐蚀破坏,所用装置的工作