论文部分内容阅读
以连接架为研究对象,利用Pro/E和ProCAST两种软件相结合的方式,对铸件进行充型过程和凝固过程的数值模拟,成功地预测了缩孔、缩松等铸造缺陷的位置。最后,通过对仿真结果的分析,优化了充型系统的设计,改善了铸造缺陷,获得了最佳工艺和铸件,提高了连接架铸件设计的开发效率和品质。
Taking the connector as the research object, the casting process and the solidification process were numerically simulated by the combination of Pro / E and ProCAST software. The casting defects such as shrinkage cavity and shrinkage were successfully predicted. Finally, through the analysis of the simulation results, the design of the filling system is optimized, the casting defects are improved, the best technology and castings are obtained, and the development efficiency and quality of the joint frame casting design are improved.