论文部分内容阅读
在CD类只读光盘复制生产过程中,常常遇到光盘检测结果不符合标准要求。通过解决光盘的质量问题,使我们对光盘的质量有了更深的理解。大家知道,影响光盘质量的因素很多,如,PC料性能和洁净度、压模质量、模具状态、注塑参数、溅镀层和腊克层的质量等。对于没有母盘生产线的复制厂,解决光盘的这些质量问题难度更大,有时仅通过调整复制设备的工艺参数无法改善光盘的质量。可见压模的质量是其中重要因素之一。由于母盘生产中诸多参数的设定受到光盘复制设备参数的影响,以及PC料性能的影响,目前没有压模检测国际标准。但是实际生产中必须进行压模出厂前检测。母盘生产厂家基本上是参照使用检测复制子盘的国
In the CD-ROM CD-ROM copy production process, often encounter disc test results do not meet the standard requirements. By solving the quality problems of the CD, we have a deeper understanding of the quality of the CD. We all know that many factors affect the quality of the disc, such as PC material properties and cleanliness, die quality, mold status, injection molding parameters, the quality of the sputtering and lacquer layers. For a copy factory without a mastering line, solving these quality issues with the discs is more difficult, and sometimes the quality of the discs can not be improved simply by adjusting the process parameters of the copying machine. Visible stamper quality is one of the important factors. Due to the setting of many parameters in the master disk production, the parameters of the optical disk replication equipment are affected, and the influence of the PC material performance is not presently there is no international standard of stamper detection. However, the actual production of the mold before the factory inspection. The master manufacturer is basically a reference to the country that uses the replica dice