【摘 要】
:
The paper presents the results of a study of the female urethra in cases of urethral pain syndrome (UPS) and inflammatory diseases of the lower urinary tract using cross-polarization optical coherence tomography (CP OCT). Urethral wall structure was studi
【机 构】
:
PrivolzhskyResearchMedicalUniversity10/1MininandPozharskySquare603005,NizhnyNovgorod,RussiaInstitute
【出 处】
:
JournalofInnovativeOpticalHealthSciences
论文部分内容阅读
The paper presents the results of a study of the female urethra in cases of urethral pain syndrome (UPS) and inflammatory diseases of the lower urinary tract using cross-polarization optical coherence tomography (CP OCT). Urethral wall structure was studied in 86 patients; 233 CP OCT images were collected. A comparative qualitative analysis of three groups of CP OCT images — “norm", “Inflammation" and “UPS" — identified that despite the absence of a clear inflammatory factor in the patient's examination, the urethral tissues in UPS were in an altered state. The changes in the urethral wall with UPS and in cases of inflammation were similar. Using a point scale, three experts independently performed visual scoring of the CP OCT images. Three parameters: epithelial contrast, cavities and the minimum signal depth in the co-channel were evaluated. It was found that, individually, the parameters correlate only weakly with the diagnosis. Area under the receiver operating characteristic (ROC) curve was from 0.51 to 0.78. The joint use of a number of visual signs has a greater diagnostic value than the use of the criteria individually. Area under the ROC curve using the developed cumulative criterion reached up to 0.87–0.89. This study could form the basis of a scoring system for assessing the state of the urethral tract using CP OCT images in real time. The CP OCT method provides information on the state of urethral tissues that cannot be obtained with traditional cystoscopy.
其他文献
采用IPG YLS-6000光纤激光器焊接4 mm厚5083-H116铝合金板,研究了焊接工艺参数对焊缝成形及缺陷的影响规律,分析了接头显微组织及力学性能。研究结果表明,激光功率、焊接速度及离焦量三者的匹配综合影响焊缝的熔透情况;光纤激光焊接5083铝合金的主要问题是表面下凹及咬边;在熔透条件下采用较高功率5 kW及6 kW,速度范围在6 m/min~9 m/min的光纤激光能够得到较为理想的焊缝;在零离焦、功率6 kW及焊接速度9 m/min的优化参数下,焊接接头中从熔合线至焊缝中心, 结晶形态从细密的
Over the past decades, photonics has transformed many areas in both fundamental research and practical applications. In particular, we can manipulate light in a desired and prescribed manner by rationally designed subwavelength structures. However, con
将高毒性的Cr(VI)还原成低毒的Cr(III), 是处理含Cr(VI)废水常用的方法之一。以高效还原Cr(VI)的苏云金芽胞杆菌(Bacillus thuringiensis, 简称Bt)407为研究对象, 将转座子随机突变载体pIC333转化Bt 407, 构建容量为1 500株的随机突变体库, 从中筛选出Cr(VI)还原能力极显著差异(P
报道一种由NH2D气体斯塔克盒和光电反馈控制回路构成的无腔镜光学双稳装置.实验中观测了该装置的光学双稳性,实验结果与理论分析相一致.
The stabilizing process of glass particle in water by optical trap using the pulsed counter-propagating Gaussian beams is investigated. The influence of the optical power and the particle dimension on the rate and time of the stabilizing process is simula
针对雾天图像存在信息丢失、区域不清晰以及雾气遮挡等问题,提出了一种基于双边滤波的高斯金字塔变换Retinex图像增强算法,以提高雾天图像的对比度。首先,基于空间域核函数和像素差,建立了改进的双边滤波函数数学模型。然后,将输入图像转换为HSI(Hue,Saturation,Intensity)图像,用改进的双边滤波函数代替原算法中的高斯函数,从亮度图像(I色彩空间)中提取反射分量,以获得保持边缘且不
Ta2O5 and Nb2O5 films are deposited on BK7 glass substrates using an electron beam evaporation method and are annealed at 673 K in the air. In this letter, comparative studies of the optical transmittance, microstructure, chemical composition, optical abs
陀螺仅原理基于角动量守恒定律。但一系列导致误差的扰动力矩会影响回转转子。例如,由外部作用的加速度由于质量不平衡和弹性作用导致回转轴位移,即导致偏差。