论文部分内容阅读
“铁谱”透射电镜法是新开创的一种研究机械磨损微观机制的方法。采用透射电镜观察金属磨粒的形貌、计算微小磨粒尺寸、分析相结构以及分析各种磨粒状态等方面都有极高的准确性。如果采用类似H-800型综合分析电镜,观察分析“铁谱”透射电镜样品。可以获取微小磨粒同位置的形貌、衍射花样及能谱化学成份的综合分析结果。同时消除了扫描电镜分析“铁谱”片时,由玻璃载玻片带来的影响,大大提高了实验精度。“铁谱”透射电镜法,经三年的完善,成功率达90％以上,并获取了各种类型的微粒子形貌,图中是
“Ferrography” transmission electron microscopy is a newly created method of studying the micro-mechanisms of mechanical wear. Transmission electron microscopy to observe the morphology of the metal abrasive particles, calculate the size of the fine abrasive particles, analyze the phase structure and analyze the various abrasive states and so on. All these have very high accuracy. If you use a similar H-800-type integrated analysis of electron microscopy, analysis and analysis of “iron” TEM sample. Can get the same position of the micro-abrasive particles, diffraction patterns and chemical composition of the spectrum analysis results. At the same time, it eliminates the influence brought by the glass slide when analyzing the “iron sheet” by scanning electron microscope, which greatly improves the experimental precision. “Ferrography” transmission electron microscopy, after three years of improvement, the success rate of more than 90%, and access to various types of particle morphology, the figure is