论文部分内容阅读
手摇式绕线机手摇式绕线机(见图6)主要部分是A心轴—用来穿入绕模,是一条约15厘米长1直径厘米的螺杆,B面板—与心轴垂直,让绕模边板压贴,保持绕模与心轴的垂直位置,H驱动柄—有弹簧装置,可以随时拆出,或装到心轴上直接摇转,以便获得1:1的低速绕线;当如图装置时,按两个带轮大小的比例,可得2、3或4:1的速比;慢速适宜绕制粗硬线圈,快速适宜绕细线。机上的圈数或转数表通过心轴的1:1传动弹簧带来传动,可以记录出所绕圈数。
Hand winder The hand winder (see Figure 6) is the main part of the A mandrel - used to penetrate the mandrel is about a 15 cm long 1 cm diameter screw, B panel - perpendicular to the mandrel , So that the mandrel around the die pressure to keep the mandrel around the mandrel and the vertical position, H drive handle - a spring device, you can at any time to disassemble, or directly to the mandrel rocking in order to obtain 1: 1 low-speed winding Line; when the device shown in the figure, according to the ratio of the two pulley size, available 2,3 or 4: 1 speed ratio; The number of turns on the machine or the number of revolutions is driven by a 1: 1 drive spring on the spindle which records the number of turns.