论文部分内容阅读
我们厂的木工净光过去都是采用罗圈刨和拉杆刨来完成。它存在着噪音大,占地面积多,操作不灵便和工作效率低的缺点。针对上述问题,我们自行设计试制了一台300毫米木工净光刨床。通过一段时间的使用,证明它具有净光速度快,无噪音,机器占地面积小,自动进料,降低劳动强度,比原用罗圈刨净光提高工效5倍。而且机器结构简单,造价低等优点。但仍有不足之,如胶辊磨损大,进料阻力大等。拟准备改进胶辊胶的品种或改用铁辊,以延长使用寿命,增加三个铁辊,以减小进料阻力等。
The woodworking of our factory was done by using ring-rasters and rod-shavers in the past. It suffers from the drawbacks of loud noise, large footprint, poor handling and low work efficiency. In response to the above problems, we designed and manufactured a 300 mm woodworking net planer. Through the use of a period of time, it has proved that it has a net light speed, no noise, the machine covers an area of small, automatic feeding, reduce labor intensity, compared with the original ring grinder net improve work efficiency 5 times. And the machine structure is simple, low cost and other advantages. But there are still inadequate, such as rubber roller wear, feed resistance and so on. It is proposed to improve the varieties of rubber roller glue or use iron rollers to prolong the service life and add three iron rollers to reduce the feed resistance.