论文部分内容阅读
By using transmission electron microscopy and electron back-scattered diffraction, the effect of annealing temperature on the precipitation behavior and texture evolution in a warm-rolled interstitial-free high strength steel was studied. The results indicated that fine FeTiP could precipitate at 650 °C, and the number of those precipitates increased greatly with the increasing annealing temperature until 800 °C. Furthermore, the nucleation of FeTiP was influenced by the precipitation of TiC and(Ti, Nb) C. The near absence of FeTiP and a large volume fraction of TiC and(Ti, Nb) C in matrix are envisaged to be primarily responsible for the sharp c-fiber texture. As the boundary pinning effect caused by FeTiP is weak and there are less interstitial C atoms in matrix. Thus, annealing at 800 °C leads to the highest intensity of c-fiber texture.
By using transmission electron microscopy and electron back-scattered diffraction, the effect of annealing temperature on the precipitation behavior and texture evolution in a warm-rolled interstitial-free high strength steel was studied. The results indicated that fine FeTiP could precipitate at 650 ° C , and the number of those precipitates increased greatly with the increasing annealing temperature until 800 ° C. The nucleation of FeTiP was influenced by the precipitation of TiC and (Ti, Nb) C. The near absence of FeTiP and a large volume fraction of TiC and (Ti, Nb) C in matrix are envisaged to be primarily responsible for the sharp c-fiber texture. As the boundary pinning effect caused by FeTiP is weak and there are less interstitial C atoms in matrix. ° C leads to the highest intensity of c-fiber texture.