Multiuser MIMO Downlink Transmission Schemes over Time-Varying Channels

来源 :Tsinghua Science and Technology | 被引量 : 0次 | 上传用户:Yeah12345678
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The performance of multiuser multiple-input-multiple-output (MIMO) downlink systems with block diagonalization (BD) depends on the accuracy of the channel state information (CSI) available at the transmitter and the receiver. In time-varying channels, the CSI available at the transmitter (CSIT) is always out-dated due to an inherent time delay between the uplink channel estimation and the downlink data transmission in time division duplexing (TDD) systems. This leads to a drastic degradation of system capacity. This paper first analyzes the effect of the outdated CSIT on multiuser MIMO downlink systems using the BD method and then proposes two linear processing methods, BD precoding with user selection and scheduling at the transmitter and total minimum mean squared error (MMSE) decoding at the receiver (TBDUSS-RTMMSE) and BD precoding at the transmitter with partial MMSE decoding at the receiver (TBD-RPMMSE), to mitigate the interference among data streams and users. Analysis and simulation results show that these methods can effectively reduce the impairment of the outdated CSIT to increase the system sum capacity in a suitable time delay region of the CSIT. The performance of multiuser multiple-input-multiple-output (MIMO) downlink systems with block diagonalization (BD) depends on the accuracy of the channel state information (CSI) available at the transmitter and the receiver. In time-varying channels, the CSI available at the transmitter (CSIT) is always out-dated due to an inherent time delay between the uplink channel estimation and the downlink data transmission in time division duplexing (TDD) systems. This leads to a drastic degradation of system capacity. This paper first analyzes the effect of the outdated CSIT on multiuser MIMO downlink systems using the BD method and then proposes two linear processing methods, BD precoding with user selection and scheduling at the transmitter and total minimum mean squared error (MMSE) decoding at the receiver (TBDUSS- RTMMSE) and BD precoding at the transmitter with partial MMSE decoding at the receiver (TBD-RPMMSE), to mitigate the interference among data streams and users. Analysis and simu lation results show that these methods can effectively reduce the impairment of the outdated CSIT to increase the system sum capacity in a suitable time delay region of the CSIT.
其他文献
一些特钢企业已经开始意识到后道精整、包装的重要性,并投入了大量的资金和设备,其效益和竞争力也得到很大的提高。本文就有关钢材后道精整、包装的工艺以及相关设备做简单的介
食盐加碘在捷克共和国始于 1947年 ,196 5年起全国食盐加碘量为 18mg/ kg,196 7年 10月 10日发布的法规规定用 KI作为碘剂。最近一次即 1997年由捷克卫生部规定要求加碘为 2
本文详细论述了热钢坯打号机、热钢坯电弧喷涂机、热刚板(钢卷)喷码机和常温钢铁产品大字符喷码机四种常用在线标识设备的国内外现状和存在的问题,给出了该类产品国产化过程
山东泰山钢铁集团冷轧薄板厂与北京清华大学核物理研究院联合开发了X射线测厚仪并在1000mm精整线上成功应用,实施在线自动测量厚度、记录和分析、打印等功能,减少了人工测量
滚切式定尺剪是国内、外宽厚板生产线上一种新兴的机型。滚切式定尺剪是利用上剪刃滚动的原理来实现剪切。设计方法主要是剪切机构运动轨迹的分析与确定,而瞬心法概念的提出,
南京钢铁集团中厚板卷厂精整车间所用的定尺剪使用了二十世纪九十年代最先进的技术,具有切口平整光滑定尺精确的特点。定尺剪类型为二轴二偏心滚切式,由两台交流电机(750kw、
以宝钢股份特殊分公司的1450mm两辊平整机为对象,以影响函数法及线性函数变形协调理论为基础,研究了工作辊及板带的变形协调关系。通过调整弯辊力,保证带钢在宽度方向受力均
从1990年上海、深圳分别建立证券交易所开始,中国的股票市场已经走过了二十多个年头。在这二十多年里,我国资本市场经历了从小到大、从无序到规范的过程,成长速度堪称奇迹,如
In this paper, a novel adaptive transmit-receive scheme is presented for indoor Direct Se- quence Ultra-WideBand (DS-UWB) systems. In the proposed scheme, a sim
为进一步了解和掌握无锡市中小饮食企业的卫生情况,于1999年4~5月对全市237家中小饮食企业(按抽样10%的比例)进行了调查。1现状和问题1.1饮食企业规模偏小在我市2587家饮食企业中,大型的72家,仅占2.8%;在中小型