论文部分内容阅读
我厂生产的门板成形线和侧板滚轧线中,上料装置台车上的定尺钢板由机械手分张上料。在设备调试过程中发现,由于钢板在下料时表面沾有油污,相互间表面张力很大,再加上几百张板料叠放在一起,故上料时经常会出现叠料现象,影响丁生产线的正常使用。我们设计了一种磁性分板机构,较好地解决了这一难题,在生产中具有一定的借鉴价值。 1.基本结构 基本结构如附图所示,装置主要由三部分组成。1)磁体组件1,内有磁块、包皮及安装板4等。2)安装架5,作用足将该机构与台车相连。3)调整机构,由过渡板10、挡板11及调节螺钉12组成。过渡板10通过其两
I plant the door forming line and the side of the roll line, feeding device trolley on the length of the plate from the robot sub-Zhang feeding. In the process of equipment debugging found that due to the surface of the plate in the feeding of oil stains, a great surface tension between each other, together with hundreds of sheets stacked together, so when the material is often stacked phenomenon, the impact of small The normal use of the production line. We designed a magnetic sub-plate mechanism, a better solution to this problem, in the production of a certain reference value. 1. The basic structure of the basic structure As shown in the figure, the device consists of three parts. 1) magnet assembly 1, there are magnets, the foreskin and the mounting plate 4 and so on. 2) mounting bracket 5, the role of enough to link the body with the trolley. 3) adjustment mechanism, the transition plate 10, the baffle 11 and the adjustment screw 12 composition. The transition plate 10 passes through both of them