大叶相思种源选择试验

来源 :广东林业科技 | 被引量 : 0次 | 上传用户:chuanqi111
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
对从昆士兰引进的5个大叶相思种源及1个本地种源,在琼海试点和花都试点进行试验,结果表明,引进种源在前者的生长表现均比后者好。不同种源在同一试验点比较,以15697和15483种源生长快、产量高,年平均生长琼海试点和花都试点分别为胸径2.0cm和1.3cm、树高2.3m和1.3m、生物量25.36t/hm2和13.63t/hm2以上,明显地优于其余各种源。花都试点的5个引进种源树高、胸径生长量及生物产量均比本地种源高。此外,在引进种源的林分中单干或直干型的单株,以15697和15483种源的林分居多,平均占40.4%~70.4%和45%~70%。由此看出,15697和15483两个种源具有很大的发展潜力 Five large-leaved Acacia species introduced from Queensland and one local provenance were tested in the Qionghai Pilot and the Huadu Pilot. The results showed that the introduction of provenances in the former showed better performance than the latter. Different provenances were grown at 15697 and 15483 sources, with fast growth, high yield and annual average growth. The Qionghai pilot and Huadu pilot were 2.0cm and 1.3cm in diameter at breast height and 2.3m and 1 tree height respectively. 3m, biomass 25.36t / hm2 and above 13.63t / hm2, obviously better than the rest of the sources. Huadu pilot five introduced provenance tree height, DBH growth and biological yield higher than the local provenance. In addition, the single-plant or straight-dried plants in the provenances were dominated by 15697 and 15483 provenances, accounting for 40.4% ~ 70.4% and 45% ~ 70% on average. This shows that 15697 and 15483 two provenances have great potential for development
其他文献
叙述了六辊轧机(HC轧机)结构型式的新发展及其在各国的使用情况,同时指出了设计这种轧机应注意的问题及主要参数的确定方法。1六辊轧机的新发展及使用情况 HC轧机即通常所说
“以前卖手机是不说的,今后卖手机要说了,而我们的优势,就在说上。”——神州数码副总裁林杨“买电脑我会去中关村,买手机可能在我家附近的零售店就解决了,神州数码能把手机
测量了去合金后的掺砷双相黄铜H_(62)As中的正电子寿命,为黄铜优先腐蚀的双空位机制提供了较为直接的实验证据。讨论了掺砷黄铜抑制脱锌的机理。 The positron lifetime in
冬春两闲,交管部门会借助农民群众赋闲在家的有利时机,上门宣传交通安全。给广大群众送上丰厚的交通安全“宣传大餐”,既保证群众交通安全,又丰富他们的业余文化生活,是件大
本文研究了铝材连续铸挤过程中,工艺参数对建立稳定连续铸挤条件的影响,试验结果表明,铝材连续铸技采用90°—180°挤压轮槽包角的结构形式,均可实现连续铸挤,而稳定连续铸挤
The inhibitory effeet of crude extracts of garlic, clove and carrot at concentrations of 20,000, 40,000,60,000, 80,000 and 100,000 μg/mL on growth of Aspergill
日立将在华建立中国首条背投电视投影管生产线日立公司今年6月将在深圳成立新的合资公司,建立中国首条背投电视的投影管(简称PRT)生产线。随着市场对高清晰度、大屏幕电视需
对牵引从动齿轮拟采用的两种渗碳钢15CrNi6和12CrNi3钢的模拟齿根弯曲疲劳和接触疲劳性能进行了试验,并与渗碳主动齿轮材料20CrMnMo钢和感应淬火从动齿轮材料50CrMo钢的性能
The pull-pull low cycle fatigue test is conducted for various specimens made from GH33A steel. There are three forms of the specimens: the cylindrical bar, the
11月10日至11日,中国民办职业教育行业专家和来自世界各地的职业院校或机构领导100余人齐聚广州,参加由中国职业技术教育学会主办的“中国改革开放30周年与民办职业教育发展