论文部分内容阅读
工程机械设备安装的质量好坏,决定于对安装的设备严格的检验与调整。在整个安装或维修中,由于对安装质量稍有疏忽而造成的缺陷,不论是最细小的或是较大的,均会使零件过早的磨损和损坏其中的部件,从而降低设备的使用寿命及施工的正常进行。转动机构的检验与调整的目的就是要考察部件装配工艺执行得是否正确,检查安装的机构是否符合技术规范的要求.凡是检查出不符合技术要求规定的部分,要加以分析和进行调整,以确保设备达到规定的技术要求和安全生产能力。
The quality of the installation of construction machinery and equipment depends on the strict inspection and adjustment of the installed equipment. In the entire installation or maintenance, due to the slightest negligence in the quality of the installation, whether it is the smallest or the largest, it will lead to premature wear and damage to the components, thereby reducing the service life of the equipment. And the construction works normally. The purpose of the inspection and adjustment of the rotating mechanism is to check whether the assembly process is performed correctly and check whether the installed installation meets the requirements of the technical specifications. Any part that does not meet the technical requirements must be analyzed and adjusted to ensure that The equipment meets the specified technical requirements and safety production capacity.