【摘 要】
：
In this study, a series of tests were conducted by using aluminum-based alloy to determine the formation of grain refining structure based on the ultrasonic vib
【机 构】
：
Department of Materials Science and Engineering,Graduate School,Faculty of Engineering
论文部分内容阅读
In this study, a series of tests were conducted by using aluminum-based alloy to determine the formation of grain refining structure based on the ultrasonic vibration (UV). Furthermore, the simulation test and effect of ultrasonic output power were studied using ammonium chloride. Finally, the mechanism of grain refinement was investigated.The results show that: (1) By applying the UV to aluminum-base alloy, the grain refining rate of ingots tended to increase with the increase of the output value of UV. (2) It was confirmed that time from after the pour to the beginning of crystallization as well as cloudiness tended to decrease with increasing the ultrasonic power value of UV. Moreover, it can be seen from each cooling curve that a uniform temperature gradient existed in the melt as the power of UV increased, that made the melt strongly stirred. (3) It was also considered that the grain refining effect of ingots, which was observed from the simulation tests, resulted from nucleation action and stirring division action by applying the UV.
其他文献
The montmorillonite was studied by different methods, such as chemical analysis, DAT, TG, XRD, IR, AFM and MAS NMR. The experimental results show that the hydro
We solve the problem of petroleum products distribution through oil pipelines networks. This problem is modelled and solved using two techniques: A heuristic me
From the measured phase equilibria data and experimental thermochemical properties, the TmCl3-ACl (A=Na, K, Rb, Cs) phase diagrams were optimized and calculated
Nanophase calcium-deficient hydroxyapatite( CDHA ) with a Ca/P ratio about 1.5 synthesized by chemical wet method was sintered at different temperatures, and th
Nano-particle hydroxyapatite (HA) was prepared with a novel ultrasonic precipitation process and the as-prepared nanopowder was used to produce hydroxyapatite (
Zinc oxide/low-density polyethylene ( LDPE ) nanocomposites were prepared for intrauterine devices. The change of Zn2+ release rates of nanocomposites ( doped w
Some rare earth doping spinel LiMn2-xRExO4 (RE=La, Ce, Nd) cathode materials for lithium ion batteries were synthesized by the solid-state reaction method. The
Chemical compositions and microsturcture of mature human tooth enamel were investigated by XRD , FTIR and SEM to further understand the characteristics of tooth
A series of random and block poly (L-lactide-co-ε-caprolactone) (PCLA) copolymers with different composition are prepared using starmous octaoate as catalyst.
Oxygen diffusion and oxygen selective adsorption properties of rare earths material YBa2Cu3O7-x (YBCO) were investigated by thermogravimetric, oxygen static ads