【摘 要】
：
Image quality is one of the most important specifications of optical lithography tool and is affected notably by temperature, vibration, and contamination of pr
【机 构】
：
State Key Laboratory of Digital Manufacturing Equipment & Technology,Tianhua College
【基金项目】
：
国家高技术研究发展计划(863计划);国家重点基础研究发展规划(973计划)
论文部分内容阅读
Image quality is one of the most important specifications of optical lithography tool and is affected notably by temperature, vibration, and contamination of projection lens(PL). Traditional method of local temperature control is easier to introduce vibration and contamination, so temperature control system with multi-closed loops is developed to control the temperature inside the PL, and to isolate the influence of vibration and contamination. A new remote indirect-temperature-control(RITC) method is proposed in which cooling water is circulated to perform indirect-temperature-control of the PL. Heater and cooler embedded temperature control unit(TCU) is used to condition the temperature of the cooling water, and the TCU must be kept away from the PL so that the influence of vibration and contamination can be avoided. A new multi-closed loops control structure incorporating an internal cascade control structnre(CCS) and an external parallel cascade control structure(PCCS) is designed tO prevent large inertia, multi-delay, and multi-disturbance of the RITC system. A nonlinear proportioual-integral(Pl) algorithm is applied to further enhance the convergence rate and precision of the control process. Contrast experiments of different control loops and algorithms were implemented to verify the impact on the control performance. It is shown that the temperature control system with multi-closed loops reaches a precision specification at ±0.006 ℃ with fast convergence rate, strong robustness, and self-adaptability. This method has been successfully used in an optical lithography tool which produces a pattern of 100 nm critical dimeusion(CD), and its performances are satisfactory.
其他文献
d. We carried out Monte Carlo simulation with typical aeronautical en-route channel, and the simulation results are in agreement with the deduced theoretical pe
sumers to communicate with each other expediently. Experimental results show that DMTN can provide not only traditional TV services on schedule, but also digita
Through the analysis and comparison of shortcomings and advantages of existing technologies on object modeling in 3D applications, we propose a new modeling met
Through the study on the output signals of the electro-hydraulic regulating system in the thermal power plant, a novel method for online diagnosis of the pluggi
A threshold setting scheme is proposed based on the resource management and limited feedback theory in multiuser orthogonal frequency division multiplexing (OFD
After conducting a lot of screening experiments the appropriate flocculating formulations for treating high-con-centration wastewater discharged fiom a certain
This article presents an efficient rate control scheme for H.264/AVC video coding in low bit rate environment. In the proposed scheme, an improved rate-distorti
In doubly-selective fading wireless channel, the conventional orthogonal frequency division multiplexing (OFDM) receivers for inter-carrier interference (ICI) c
Over the past years, more and more attention has been paid to artificial life research. The main object of artificial life research is to explore how to control
APP with the crystal lattice defects. The SEM images indicate that the form Ⅱ APP is of multilayer crystal structure. XRD and TEM can reveal the crystal lattic