【摘 要】
：
A temperature-based method is usually applied in displacement ventilation (DV) design when overheating is the primary indoor climate concern. Different steady-s
【机 构】
：
Aalto University,Department of Mechanical Engineering,Espoo,Finland;Aalto University,Department of M
论文部分内容阅读
A temperature-based method is usually applied in displacement ventilation (DV) design when overheating is the primary indoor climate concern. Different steady-state models have been developed and implemented to calculate airflow rate in rooms with DV. However, in practical applications, the performance of DV depends on potentialy dynamic parameters, such as strength, type and location of heat gains and changing heat gain schedule. In addition, thermal mass affects dynamicaly changing room air temperature. The selected steady-state and dynamic models were validated with the experimental results of a lecture room and an orchestra rehearsal room. Among the presented models, dynamic DV model demonstrated a capability to take into account the combination of dynamic parameters in typical applications of DV. The design airflow rate is calculated for the case studies of dynamic DV design in the modelled lecture room in both dynamic and steady-state conditions. In dynamic conditions of heavy construction in 2–4 hours occupancy periods, the actual airflow rate required could be 50％ lower than the airflow rate calculated with the steady-state models. The difference between steady-state and dynamic multi-nodal model is most significant with heavyweight construction and short occupancy period (17％–28％). In cases with light construction, the dynamic DV model provides roughly the same airflow rates for four-hour occupancy period than the Mund's model calculates. The dynamic model can significantly decrease the design airflow rate of DV, which can result in a reduction of investment costs and electrical consumption of fans.
其他文献
While the primary role of window attachments is often to moderate glare and solar heat gains, they are also able to provide additional daylight to interior spac
To improve the prediction accuracy of heating demand, an appropriate base temperature should be estimated before using the heating degree-days (HDD) approach. T
A major roadblock in achieving substantial building energy reduction is the low performance of old buildings that account for a significant portion of the build
Ceiling fans are used all over the world as a mean of enhancing indoor thermal comfort. A number of grading programs have been initiated for assessing energy pe
Architects welcome double skin facade (DSF) due to its aesthetic quality. The first DSF structure was intended to prevent cold weather and strong winds. Nowaday
The indoor parameters are generally non-uniform distributed. Consequently, it is important to study the space cooling/heating load oriented to local requirement
Evidence indicates that improvement of thermal performance of building envelope has the potential for aggravating the indoor overheating risk in summer. On the
A computational research of radiative-convective energy transport in large-scale enclosure with a heat-generating heater under normal room conditions has been c
Particulate matter emission from rotating wheels, which imparts a force to the contact surface and causes strong air currents, is one of the important pollutant
随着节能标准的不断提升,节能造价成本也随之增多;设计人员对建筑节能知识、相关标准理解不到位,设计时保守意识较为严重,对节能新技术新产品不够了解,造价成本不够熟悉,造成节能方案成本偏高的情况。文章通过对节能造价成本与相关节能设计标准及规范的解读,分析节能优化设计的原则,总结概括了节能优化设计管控措施,形成设计优化策略,以期对EPC项目设计阶段成本控制具有一定的指导意义。