论文部分内容阅读
我厂制材车间,在七四年学习兄弟单位先进经验,在74年制成一台自动跑车,摇尺采用自整角机。我厂是专为土建施工单位服务的,锯圆木不但要出板材,而且要出方材,为了节省木材,又需看材下料,因此单靠自整角机就满足不了加工上的要求,因为,自整角机摇尺不能反映出圆木在跑车上的剩余量。针对这个问题,制材车间维修组的同志们,在厂党委、车间支部的正确领导下,以阶
Our factory material workshop, in 1984 to learn the advanced experience of the siblings, made an automatic sports car in 74 years, using a synchronic shaker. Our factory is specially designed for civil construction companies. Not only does the sawn timber have to be out of the sheet, but also it has to be squared out. In order to save the wood, it is necessary to look at the material, so the sole machine can not meet the processing requirements. Because, since the synchro shaker can not reflect the remaining amount of round wood in the sports car. In response to this problem, the comrades of the maintenance group of the material-making workshop are under the correct leadership of the factory party committee and workshop branch.