论文部分内容阅读
在煤矿工程施工过程中,井下测量是最基本也是最重要的组成部分,它始终贯穿于整个矿井施工。根据国家相关规定,煤炭企业必须要在遵循规范的基础上开展测量工作,各项测量数据也必须在遵守相应规范下测量得出。由此不难看出,对矿井要求非常严格。无论是新矿井还是旧矿井,在进行开采前都必须按照国家相关规范和标准进行检测,一方面要确保整个检测过程的安全性,另一方面,要做到对煤炭资源的合理开发和利用。提高煤矿经济效益,为社会创造更多价值。
In the process of coal mine construction, underground measurement is the most basic and most important component, which runs through the entire mine construction. According to the relevant state regulations, coal enterprises must carry out measurement work on the basis of complying with the norms, and all measurement data must also be measured under compliance with relevant standards. It is not hard to see that the requirements of the mine is very strict. Both new mines and old mines must be inspected according to relevant national norms and standards before mining. On the one hand, the safety of the entire testing process should be ensured; on the other hand, reasonable exploitation and utilization of coal resources should be achieved. Improve the economic efficiency of coal mines and create more value for the society.