论文部分内容阅读
前轮摇摆原因①前轮轴承间隙过大;②向器方向盘自由行程超过规定值;③前束值不正确;④球头销和销座间间隙过大。排除方法①前轴承间隙在0.05～0.20毫米,调整时能轻轻用手转动前轮,并符合上述间隙为宜;②检查转向器方向盘的自由行程,当大于20°时必须进行调整;③检查前束值是否在规定范围内,不符合必须进行调整;④检查球头销间隙,如间隙太大,应更换球头销及上下座。
The reasons for the front wheel sway ① Front wheel bearing clearance is too large; ② steering wheel freewheeling stroke exceeds the specified value; ③ toe value is not correct; ④ ball head pin and pin seat gap is too large. Remedy ① front bearing clearance 0.05 ~ 0.20 mm, adjust the hand wheel gently rotate the front, and in line with the gap is appropriate; ② Check the freewheel steering wheel, when greater than 20 ° must be adjusted; ③ check Before the beam value is within the specified range, does not meet the need for adjustment; Check the ball head clearance, such as the gap is too large, should be replaced by the ball head pin and up and down seat.