【摘 要】
：
SnO2/AgIO4 hybrids were fabricated by an in-situ synthetic method at room temperature. The structure, morphology, light response range, separation efficiency of the electron-hole pairs and elements of the as-synthesized samples were characterized by adopt
【机 构】
：
School of Materials Science and Engineering, Hebei Provincial Key Laboratory of Traffic Engineering
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
SnO2/AgIO4 hybrids were fabricated by an in-situ synthetic method at room temperature. The structure, morphology, light response range, separation efficiency of the electron-hole pairs and elements of the as-synthesized samples were characterized by adopting X-ray diffraction, scanning electron microscopy, UV-Vis diffuse reflectance spectroscopy, electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy, respectively. The synergistically photocatalytic degradation mechanism of the as-synthesized composites was also proposed. The experimental results reveal that under the visible light irradiation the as-synthesized SnO2/AgIO4 hybrids can enhance the photocatalytic degradation efficiency of rhodamine B compared to pure samples. With increasing the molar ratios of AgIO4 to SnO2, it displays the trend of first increasing and then decreasing. When it is 1:2 in 150 min, the as-prepared hybrids have the highest degradation efficiency of 93.1％, which increases by 6550.0％, 30.5％, and 1505.0％ compared to those of pure SnO2, AgIO4, and TiO2 (P25), respectively. Moreover, the Sn-O-Ag cross-linking bonds are formed at the interfaces of SnO2 and AgIO4. In addition, superoxide anion radicals and holes play a major role in the process of photodegradation.
其他文献
A LiFePO4/C composite was synthesized by a simple solid-state reaction method using glucose as reductive agent and carbon source and FePO4 as precursor, which was prepared by introduction of Na3PO4 as phosphorus source and pH regulator in order to pursue
Tetragonal zirconia (T-ZrO2) ceramic nanopowders stabilized with 3 mol％ Y2O3 were synthesized via polyacrylamide gel method, using ZrOCl2?8H2O and Y(NO3)3?6H2O as raw materials. The effect of temperature on phase composition and morphology of YSZ nanopowd
The results of a study on the homogeneity of suspensions are described considering the effect of different types of surfactant stabilizers and their concentrations on the uniform distribution of a carbon nanotubes (CNTs)-based modifying additive to constr
Crystallization characteristic of periclase in clinker and effect of Mg2+ on hydrate of cement pastes were investigated. Morphologies and relative content of periclase were characterized with scanning electron microscopy and X-ray diffraction. Derivative
YSZ/(Ni, Al) composite coatings with different Ni:Al mole ratios were deposited on superalloy Inconel 600 by electrophoretic deposition (EPD) technique, followed by sintering in CH4 atmosphere at 1100 ℃for 2 h and isothermally oxidation at 1000 ℃ for 50 h
Toxicity of MgO and ZnO nanoparticles at concentrations of 250,500 or 1 000 mg/L for Citrus maxima seedlings was investigated to evaluate the potentiality of their use as nano-fertilizers.Uptake and translocation of metal oxide nanoparticles and lipid per
A novel fused nonacyclic monomer of dithieno[6,5-b:10,11-b\'\']-8H-cyclopentyl[1,2-b:4,3-b\'\'] diphenanthrene (DTCPDP) was synthesized by combining the structural features of ladder-type and multiple fused multi-cyclic aromatics. DTCPDP has a sin
X-ray diffraction, scanning electron microscopy and transmission electron microscopy were employed to investigate the microstructure and morphology of Au NPs/ZnO NTs, and their photo-catalytic capability was assessed to a nicety. The results demonstrated
A serial of ordered meso-macroporous phosphotungstic acid (HPW) supported on SiO2 nanocomposites were successfully prepared by a homogeneous precipitation method, using monodispersed polystyrene (PS) microspheres and cationic surfactant as structure direc
A specially developed ultrasonic measurement apparatus (UMA) was used to in situ monitor the setting process of fly ash blended cement paste. Combined with the results of Vicat Needle tests, isothermal calorimetric measurement, XRD analysis, SEM morpholog