【摘 要】
：
Using solid-state synthesis method,a series of samples of lanthanum doped Li1-xLaxFePO4(x=0.0025,0.005,0.0075,0.01)were prepared.Each cathode structural and ele
【机 构】
：
Department of Materials Science and Engineering,State Key Laboratory of New Ceramics and Fine Proces
论文部分内容阅读
Using solid-state synthesis method,a series of samples of lanthanum doped Li1-xLaxFePO4(x=0.0025,0.005,0.0075,0.01)were prepared.Each cathode structural and electrochemical properties were investigated using X-ray diffractometry(XRD),scanning electron microscopy(SEM),electrochemical impedance spectroscopy(EIS)and charge/discharge cycling.Nanopowders material with single-phase could be obtained.The reversible capacity could be drastically improved by the introduction of La.The optimum cells with Li0.99La0.01FePO4 cathode showed relatively high capacity of 123 mAh/g close to 73% of the theoretical capacity for C/2 discharge rate.Upon further cycling,the maintenance of the capacity was observed in the Li1-xLaxFePO4/1 mol/L LiPF6+EC/DMC(1:1 vol)/Li cells during cycling studies.The effect of La was to form lattice doping,reduce crystal size to nanoscale,increase conductivity and enhance diffusion rate of lithium ion.The results confirmed that rare earth doping is an effective method for improving electrochemical properties of the promising alternative cathode.
其他文献
The electronic properties of sphalerite (110) surface with Zn-vacancy and S-vacancy were calculated by using density-functional theory, and the effects of vacan
On the base of nonlinear liquidus and solidus, an extended model for dendrite growth in bulk undercooled melts was developed under local non-equilibrium conditi
The accuracy of nucleation parameter is a critical factor in the simulation of microstructural evolution during dynamic recrystallization (DRX). Based on the fl
The Ti-35%Nb (mass fraction) foams were prepared by a powder metallurgy method, and the microstructure and the mechanical properties of the foams under monotoni
Extensive testing was carried out to study the effects of rare earth Ce doping on the properties of SnAgCu solder alloys. The addition of 0.03% (mass fraction)
It is economically advantageous to cast wrought aluminum alloys directly into near-net-shape components. The objective of the present work is to take advantage
The influence of the manganese-alloying on the structure and magnetocaloric properties of the Gd5Si2.05Ge1.95 compound was studied by X-ray powder diffraction a
Ce-doped ZnO films were prepared by the sol-gel method with spin coating onto glass substrates.Zinc acetate dihydrate,ethanol,diethanolamine and cerium nitrate
The cross-sectional distortion usually appears during rotary-draw bending process of thin-walled rectangular tube with small bending radius. To study the cross-
Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.101.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of