论文部分内容阅读
To improve billet quality and the trackability and stability of secondary cooling water during continuous casting,the superheat is introduced into the water distribution for secondary cooling to design the relevant control system,based on the water distribution model,superheat and fuzzy self-adaptive PID(process identity).A spray cooling system is set up for simulation test in laboratory to test the step signal from the conventional,integral separated and fuzzy self-adaptive PID controllers and the simulation casting.And the on-site test is done in some steel plant.The test results show that the fuzzy self-adaptive PID controller’s performance is better than that of the other two controllers,which provides a basis for further study and application.
To improve billet quality and the trackability and stability of secondary cooling water during continuous casting, the superheat is introduced into the water distribution for secondary cooling to design the relevant control system, based on the water distribution model, superheat and fuzzy self-adaptive PID ( process identity). A spray cooling system is set up for simulation test in laboratory to test the step signal from the conventional, integral separated and fuzzy self-adaptive PID controllers and the simulation casting. And the on-site test is done in some steel plant. the test results show that the fuzzy self-adaptive PID controller’s performance is better than that of the other two controllers, which provides a basis for further study and application.