论文部分内容阅读
我公司现有抚顺产W1001及W1002型挖掘机各一台，它们的水平轴传动装置上的左锥形离合器和相连的链轮的轴向定位是用三个紧定螺钉拧入水平轴花键部分相应的三个定位孔中，大齿轮端用挡板及螺栓紧固来实现的，如图1、2所示。在使用过程中，由于全部动力通过左锥形离合器及链轮传
My company’s existing Fushun W1001 and W1002-type excavators each one of their horizontal shaft drive on the left cone clutch and the connected sprocket axial positioning is to use three setscrew into the horizontal shaft spline Part of the corresponding three positioning holes, the big gear ends with the baffle and bolt fastening to achieve, as shown in Figure 1,2. During use, all power is transmitted through the left cone clutch and sprocket