电动葫芦简易限位器

来源 :机械工人.冷加工 | 被引量 : 0次 | 上传用户:luannj
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
电动葫芦是工矿企业中常用的起吊设备,它作水平吊运工件时,经常发生电动葫芦减速器及电机风叶罩壳与工字梁支撑物(钢架或墙壁)碰撞的现象。这样,不仅会损坏电动葫芦各部位机件及墙面、撞坏电机风叶罩壳,也不利于安全生产。如采用电器行程开关,仍会因惯性作用而不能立即停止移动。为此,我们用限位器焊接在工字梁二端底部,即可有效地使电动葫芦在支撑物前一定距离停车。限位器宽度应与工字梁底部尺寸b相等, Electric hoist is a commonly used lifting equipment in industrial and mining enterprises, it is hoisting the workpiece horizontally, often occur electric hoist reducer and the electric fan blade shell and I-beam support (steel frame or wall) collision phenomenon. In this way, not only will damage to various parts of the electric hoist parts and walls, crashed motor blade cover, it is not conducive to safety in production. Such as the use of electrical switches, still inertia will not be able to immediately stop moving. To this end, we use the stopper welding the two ends of the I-beam at the bottom, you can effectively make the electric hoist in front of a certain distance to stop parking. Stopper width should be the same size with the bottom of the beam b,
其他文献
由于油阻尼振动子的阻尼率不易改变,因而作振动子幅频特性试验时,只能作(?)=0.7左右的一条幅频特性曲线。本文采用电磁阻尼振动子作为试验振动子,其阻尼率与外电阻(包括信号
今天的黔江,经济、社会、生态、人口协调发展,未来的黔江,将成为渝东南经济中心。 Qianjiang today, economic, social, ecological and population coordinated developmen
For the structure system with epistemic and aleatory uncertainties,a new state dependent parameter(SDP) based method is presented for obtaining the importance m
RIS构型的判断,通过写出待定对映异构体的Fischer投影式,根据“顺序规则”确定连在手性中心上基团的优先次序,根据最小基团在Fischer投影式的垂直线上或水平线上进行准确、迅速的判断。
QuantumChemicalCalculationontheStructuresandElectronicPropertiesofPhosphonateEsterasRareEarthExtractantsZhangShaowen(张绍文),Sh...
栗黄枯叶蛾核型多角体病毒(简称TvNPV)是成都地区首次发现的一种昆虫病毒.关于TvNPV多角体蛋白及病毒粒子蛋白的一般拉曼散射(ORS)谱研究已有报道[1,2],这里报道它们在银胶溶液中的表面增强拉曼散射(SERS)谱
本文采用了火焰分先光度法测定饮用水中微量锶的含量,此方法比原子吸收法灵敏度高,采用工作曲线法的同时又以化学法消除干扰,较标准曲线法灵敏,工作状态稳定,方法简便、快捷。
一、结构与工作特点后翻卸载式装载机是在前方装载、后方卸载的一种新型结构的装载机。在整个工作过程中,物料要翻转180°左右。这些动作的完成是通过翻转机构和抓取机构来
Thirteen homocamptothecin derivatives were synthesized and in vitro antitumor activities were evaluated by the standard MTT method. The results showed that some
在二氧化碳与环氧丙烷的共聚反应中,加入某些调节剂可以得到所需要分子量和官能度的共聚物。这是因为在活泼氢和催化剂活性中心之间有链转移反应发生。我们提出了共聚反应的机