Numerical simulation of a sheet metal extrusion process by using thermal-mechanical coupling EAS FEM

• 作 者: Zhanghua Chen T.C.Lee C.Y.Tang
• 机 构: Applied Science School,Department of Industrial System Engineering
• 出 处: 北京科技大学学报
• 发表日期: 2004年期
• 关键词: enhanced assumed strain element thermal-mechanical coupling process hourglass mo
• 基金项目: research grant from the Hong Kong Polytechnic University

The thermal-mechanical coupling finite element method (FEM) was used to simulate a non-isothermal sheet metal extrusion process. On the basis of the finite plasticity consistent with multiplicative decomposition of the deformation gradient, the enhanced assumed strain (EAS) FEM was applied to carry out the numerical simulation. In order to make the computation reliable and avoid hourglass mode in the EAS element under large compressive strains, an alterative form of the original enhanced deformation gradient was employed. In addition, reduced factors were used in the computation of the element local internal parameters and the enhanced part of elemental stiffness. Numerical resultsshow that the hourglass can be avoided in compression region. In the thermal phase, the boundary energy dissipation due to heat convection was taken into account. As an example, a circular steel plate protruded by cylindrical punch was simulated. The step-wise decoupled strategyis adopted to handle coupling between mechanical deformation and the temperature variation. By comparing with the experimental results, thenumerical simulation was verified.