论文部分内容阅读
用热沥青胶(简称热油)铺贴油毡,常采用浇油法、刷油法和撒油法三种。浇油法采用两人一小组,浇油、收边1人,铺毡、收头1人(图1)。1.浇油。浇油者右手提油壶,左手拿胶皮刮板,站在铺毡的前方,即在离油毡约60厘米处,开始向卷好的油毡宽度方向冲浇热油一道,到油毡处时沿油毡前缘再横浇一道油,然后呈之字形浇油,边浇边后退(图2)。浇油不能过多,距离不能浇得太长,以免油温下降。
The tarpaulin is covered with hot bituminous glue (referred to as hot oil), and the oiling method, the brushing method and the spreading method are often used. The method of pouring oil uses a group of two people, pouring oil, collecting one person, spreading felt, and taking the first person (Figure 1). 1. Pouring oil. Oiler right portable oiler, left hand holding a rubber scraper, standing in front of the felt, that is, about 60 cm away from the felt, began pouring hot oil along the width of the rolled linoleum, along the linoleum At the front edge, an oil is again cast in the horizontal direction, and then it is poured into a zigzag shape and poured back while pouring (Fig. 2). Do not overfill the oil. The distance must not be poured too long to prevent the temperature of the oil from falling.