论文部分内容阅读
AKMS突击步枪的机匣盖是通过表尺座下方的环形卡槽并利用机匣尾部卡笋安装固定在机匣上,由于环形槽的空隙较大,再加上长期使用的磨损,机匣盖很容易产生松动,因此不宜在机匣盖上加装瞄准装置。TWS公司研制的AKMS突击步枪机匣盖在安装固定方式上另辟蹊径,其机匣盖前端通过卡销铰接在原表尺座上(将原表尺卸掉),后端仍通过机匣尾部卡笋与机匣扣合,通过这种改动提高了机匣盖定位的准确性和可靠性。改进后的机匣盖顶部前后各设有一段皮卡汀尼导轨,可供安装光学瞄准镜。而机匣盖顶部中间部位则预留一段凹槽,供安装特殊接口的附件,图中改装后的AKMS突击步枪在机匣盖中部安装了PA公司的内红点瞄准镜。
AKMS assault rifle casing cover is through the ring seat below the watch holder and the use of casing tail card shoots installed in the casing fixed, due to the larger annular groove gap, coupled with long-term use of wear and tear, the cover is very Prone to loosening, it is not appropriate to install aiming device in the casing cover. The AKMS assault rifle magazine cover developed by TWS is another way of mounting and fixing. The front end of the cover of the machine cover is hinged to the original meter seat (the original gauge is removed) through the locking pin, and the rear end still passes through the casing tail catching and casing Clasp, through this change to improve the positioning accuracy and reliability of the cover. An improved Picatinny guide rail is provided on the top and rear of the improved case cover for optical sighting. The middle part of the top of the casing lid is reserved for a groove for the installation of special interface attachments, the figure modified AKMS assault rifles installed in the middle of the casing lid PA red dot sight PA.