Influence of Mg2+ on Initial Stages of CaCO3 Scale Formed on Metal Surface

来源 :高等学校化学研究 | 被引量 : 0次 | 上传用户:stonecxx
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Magnesium ions, which exist in formation water and injection water under downhole conditions in the oil and gas production industry, are a key determinant in the CaCO3 scale formation. Many studies have focused their attention on the effect of magnesium on the kinetics, the morphology and the content of Mg in the CaCOs scale. Little attention has been paid to the effect of Mg2+ on the initial stages of CaCO3 formation on a metal surface. In this study, an electrochemical technique was used to study the influence of Mg2+ on the initial stages of CaCO3 scale formed on a metal surface. With this electrochemical technique, the reduction of the dissolved oxygen in an analysis solution is considered on the surface of a rotating disk electrode (RDE) under potentiostatic control. The rate of oxygen reduction on the surface of the RDE enables the extent of surface coverage of scale to be assessed. With this electrochemical technique, a new insight into the effect of Mg2+ on CaCO3 scale formed on a metal surface is given.
其他文献
In this paper we propose a novel method for building animation model of real human body from surface scanned data.The human model is represented by a triangular
Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer
Fully developed vertical turbulent channel flow with particle transport was investigated by use of Large Eddy Simulation (LES) approach coupled with dynamic the
The crystal structure of 2(1-phenyl-3-methyl-5-chloro-1H-pyrazol-4-yl)-3-(1- naphthoylamido)-4-thiazolidinone (C24H19ClN4O2S,Mr=462.94) has been determined by s
Regio and stereoselective synthesis of substituted dihydrofurans were accomplished by ceric ammonium nitrate mediated oxidative cycloaddition of 1,3-dicarbonyls
A series of Co/γ-Al2O3 catalysts were prepared with the impregnation method and characterized by means of the BET specific surface area, X-ray diffraction(XRD)
(a-Diimine)nickel(Ⅱ) {[C6H5 - N = C(CH3) - C(CH3) = N - C6H5]NiBr2}-TiCl4 abbreviated as NiL-TiCl4combined catalyst which is supported on MgCl2-SiO2 carrier ha
Surface modification of microporous polypropylene hollow fiber membranes was performed by radical-induced graft polymerization of N,N-dimethylaminoethyl methacr
In this article, the transesterification ofpoly(bisphenol A carbonate) (PC) with butylene terephthalate-caprolactone copolyester at a weight ratio 50/50 (BCL(21
Twenty-one 1-(1H-1,2,4-triazolyl)-2-(2,4-diflurophenyl)-3-(4-substituted-1- piperazinyl)-2-propanol derivatives were designed and synthesized,on the basis of th