论文部分内容阅读
The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-bandgap of 5.5 e V, exhibiting an intrinsic solar-blindness for deep-ultraviolet(DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- based flame sensor is demonstrated. The photodiode exhibits extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of-10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.
The sensing of a flame can be performed using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only respond to the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-band gap of 5.5 e V , exhibiting an intrinsic solar-blindness for deep-ultraviolet (DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- . The photodiode has extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of-10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.