论文部分内容阅读
机器狗的狗身是用一段挖去下部的槽板扣成的方形管材,如图1所示。在方形管材上按图钻3 mm小孔做安装孔位,狗头可以用一块橡皮雕刻而成,然后用自攻螺丝和狗颈相连。四条狗腿都是用槽板的平面板材剪成,活动关节
The robot dog’s dog body is a square tube that is dug into a lower groove plate, as shown in Figure 1. Drill 3 mm holes on the square pipe to make mounting holes. The dog’s head can be carved with a piece of rubber and then connected with a dog’s neck with a tapping screw. The four dog legs are cut from the flat plate of the grooved plate and the active joints