【摘 要】
：
In order to provide some theoretical guideline for the structure design of the new type externally pressurized spherical air bearings,the static characteristics
【机 构】
：
School of Mechanical and Electrical Engineering
【基金项目】
：
the National High Technology Research and Development Program of China
论文部分内容阅读
In order to provide some theoretical guideline for the structure design of the new type externally pressurized spherical air bearings,the static characteristics and the factors affecting the static characteristics of the air bearings were analyzed.A finite volume method was adopted to discretize the three-dimensional steady-state compressible Navier-Stokes equations,and a modified SIMPLE algorithm for compressible fluid was applied to solve the discretized governing equations.The pressure field and velocity field of the air bearings were obtained,and the factors and rules affecting the static characteristics were analyzed.The results show that the pressure of near air intakes can reach above 80％ of air supply pressure,and there is a pressure steep fall around the air intakes.When the film thickness is greater than 20 μm,the bearing capacity rapidly decreases as film thickness increases.As the air supply pressure increases from 0.2 to 0.6 MPa,the maximum static stiffness increases by more than three times.The calculation method proposed well fits the general principle,which can be extended to the characteristic analysis of other air bearings.
其他文献
Multiwalled carbon nanotubes (CNTs) were coated by a molybdenum layer using carbonyl thermal decomposition process with a precursor of molybdenum hexacarbonyl.T
Ni-P coated diamond powder was fabricated successfully by using electroless plating.Effects of active solutions,plating time,reaction temperature,and the compon
Porous ceramics were prepared from kaolinite gangue and Al(OH)3 with double addition of MgCO3 and CaCO3 by the pore-forming in-situ technique.The characterizati
In order to achieve a more efficient way to accurately detect the position of the fire source of spontaneous combustion underground mine,a simple fire source lo
The steady laminar mixed convection boundary layer flow and heat transfer of a micropolar fluid near the stagnation point on a stretched vertical surface with p
In order to present basic guidance for system calibration of split Hopkinson pressure bur (SHPB) with the special shape striker,wave characteristics and dynamic
Defects seriously influence the optical properties and mechanical properties of CVDZnS.The deposition technique was introduced and experiment methods such as SE
Consensus problems for discrete-time multi-agent systems were focused on.In order to design effective consensus protocols,which were aimed at ensuring that the