论文部分内容阅读
以6个输出功率为25 W的976 nm半导体激光器作为泵浦源,通过光纤合束器搭建双包层掺镱(Yb)光纤放大器,对中心波长为1 071.5 nm的10 W连续波掺Yb光纤激光器种子源进行主振荡功率放大,实现高功率输出.通过包层光剥离器及与系统双包层尾纤匹配的模场适配器,将放大系统的大模场双包层光纤与小芯径单模光纤进行模场匹配耦合,进而实现高功率连续波激光的单模输出.通过梯度折射率光纤熔接技术,将模场适配器的输出光纤与一段长度为200 m的高非线性光子晶体光纤进行高效率耦合,实现高功率连续波光纤激光器对高非线性光子晶体光纤的全光纤化泵浦,最终研制最大输出功率为36.5 W的全光纤化超连续谱光源,光谱范围覆盖990～1 700 nm,20 dB光谱范围达620 nm.
Using 6 976 nm semiconductor laser with output power of 25 W as the pump source, a double-clad Yb (Yb) optical fiber amplifier was constructed by using a fiber bundle combiner. A 10 W continuous wave Yb fiber with a center wavelength of 1 071.5 nm The laser power is amplified by the laser seed source to achieve high power output.According to the cladding optical stripper and the mode field adapter matched with the double clad fiber pigtail, Mode optical fiber is mode-coupled to achieve single-mode output of high-power continuous-wave laser. The output optical fiber of the mode-field adapter is connected to a section of highly nonlinear photonic crystal fiber with a length of 200 m through gradient refractive index optical fiber fusion technology Efficiency coupling to achieve high-power continuous wave fiber lasers for all non-linear photonic crystal fiber optical fiber pump, the final development of maximum output power of 36.5 W all-fiber supercontinuum light source, the spectral range of 990 ~ 1 700 nm, 20 dB spectral range up to 620 nm.