论文部分内容阅读
我分厂小自动线是生产HT15～33牌号铸铁汽车小件的射压造型线。全线采用串联布置,水平分型。共生产CA15、CA30汽车小件29种,公共汽车底盘零件5种,日产1350箱。在日常生产中,经常一个班次生产2～3个品种,有时还要试调复制模、小批试生产等,最多时每班次生产4～5种零件。这样,就给模具工人更换模板带来很大困难,在调整复制模模板时要有几人专门更换模板。由于小线的设备设计安装紧凑,所以上下主机在装模板时,工作空间小,光线暗。另外由于平时跑砂、漏油、漏气而造成的油垢,使工作环境极其恶劣,并且很容易发生人身安全
I plant a small automatic line is the production of HT15 ~ 33 grade cast iron car small injection molding line. The entire line with a series arrangement, the level of sub-type. A total of 29 CA15, CA30 car parts production, bus chassis parts 5, Nissan 1350 boxes. In daily production, often a shift production of 2 to 3 varieties, and sometimes try copying copy mode, a small batch of trial production, up to a maximum of 4 to 5 kinds of parts per shift. In this way, give the mold workers to replace the template to bring great difficulties, when adjusting the copy template to have a few people to replace the template. Due to the compact equipment design and installation of small lines, so the upper and lower host installed in the template, the working space is small, dark light. In addition, as a result of normal running sand, oil spill, leakage caused by the grease, the working environment is extremely poor, and prone to personal safety