论文部分内容阅读
自动推斗裝置的构造: 在起点站及中間站、終点站上都可安装此种裝置,如图所示。该装置安裝在进斗和出斗的架子中間,由支座7固定在木架子上,大槓杆1与小槓杆2及支杆5都焊接在支座7上。在正常时,大槓杆1的头端要长于軌道的寬度,小槓杆2的头端的长度与軌道的里面相同。当重斗进站脫线上軌时,由于在斗子的冲击作用下,大槓杆1及小槓杆2支秆5同时作同一方向的
Structure of the automatic pusher device: This device can be installed on the start station, middle station and terminal station, as shown in the figure. The device is installed in the bucket into the bucket and out of the middle of the shelf, by the support 7 is fixed to the wooden shelf, a large lever 1 and a small lever 2 and the strut 5 are welded to the support 7. Normally, the head end of the large lever 1 is longer than the width of the rail, and the length of the head end of the small lever 2 is the same as that of the rail. When the heavy bucket off the line on the track, due to the impact of the bucket, the large lever 1 and 2 small lever 2 stalk at the same time for the same direction