论文部分内容阅读
近两年来,我们检查了南昌地区固定式在用压力容器(以下简称容器)共计1500台以上,其使用单位约60多个,从检查来看,有部分容器管理较好,多数较差,少数容器管理极差,随时都有发生爆炸的危险,存在着极大的隐患。现将检查结果简述如下,供有关部门或单位参考。一、几起主要事故1.1986年6月5日,某厂的一台发酵罐(属于容器)发生爆炸事故,使一人受伤,直接经济损失约2万元。该容器系1980年设计制造,由于设计结构不合理,强度不够,焊缝施焊质量差(未焊透严重)且未经无损探伤检查,使
In the past two years, we inspected a total of more than 1,500 fixed pressure vessels (hereinafter referred to as vessels) in Nanchang and about 60 units in use. According to the inspection, some vessels were well managed and most were poor with a few Very poor container management, at any time there is the risk of explosion, there is a great risk. The inspection results are summarized below, for the relevant departments or units for reference. First, several major accidents 1. June 5, 1986, a factory fermenter (belonging to the container) explosion, one person was injured, the direct economic loss of about 20,000 yuan. The container design and manufacture in 1980, due to unreasonable design structure, strength is not enough, poor welding quality welding (without penetration serious) and without the non-destructive testing to check, so that