论文部分内容阅读
关于压缩机的日常检查、定期维护保养、故障排除等,在这里不可能详细叙述,仅仅把一般注意事项、维修保养方面一些问题略述于后。 一、一般注意事项 1.保养与修配 最近的化工厂除了原料用、合成用大型、高压压缩机以外,还使用仪表用无润滑压缩机、装置的气密试验用压缩机、加工操作等的通用空气压缩机。压缩机故障会给工厂一部或全部生产带来很大影响。 因此,保证压缩机正常、连续运转的日常检查、维修工作,是不可少的。通常,中型压缩机的定期检修少进行一、二次,可能不致于发生大的事故,因而常常偷懒,最终引起大的事故,使工厂生产蒙受大的损失。 驱动用原动机检修不好,往往也引起事故,特别是交流电动机,多半都在环境不好,安全保护不当处使用,因此,电动机也应该很好检修和擦拭。
On the daily inspection of the compressor, regular maintenance, troubleshooting, etc., here can not be described in detail, only the general precautions, maintenance, some of the issues outlined in the post. First, the general precautions 1. Maintenance and repair In addition to the recent chemical plant raw materials used in the synthesis of large, high-pressure compressors, but also the use of non-lubricated compressors instrumentation, airtight test equipment compressors, machining operations and other common Air compressor. Compressor malfunctions can have a big impact on one or all of the plant’s production. Therefore, to ensure the normal compressor, continuous operation of routine inspection and maintenance work is essential. Normally, regular maintenance of medium-sized compressors is less frequently carried out one or two times and may not cause a major accident, so often lazy, eventually causing a big accident and causing huge losses to factory production. Drive with the original motivation for maintenance is not good, often also cause accidents, especially AC motors, most of them are in a bad environment, safety protection improper use, therefore, the motor should be well overhaul and wipe.