【摘 要】
：
本文是冶金部苏联顾问水文地质专家?马斯洛夫同志蒐集有关文献编写的.它是带有规程性质的文件,可作为水文地质观测工作的指南.希冶金部系统全体水文地质人员对此文件很好的进
论文部分内容阅读
本文是冶金部苏联顾问水文地质专家?马斯洛夫同志蒐集有关文献编写的.它是带有规程性质的文件,可作为水文地质观测工作的指南.希冶金部系统全体水文地质人员对此文件很好的进行学习与讨论,并结合实际工作,提出具体意见,以便修正时参考.?马斯洛夫同志花了很多时间与精力,蒐集了丰富的资料编就这份文件,我们仅在此致以衷心的感谢.
This article is a consultant hydrogeology expert from the Soviet Union of the Soviet Union Ministry of Metallurgical Mashafu collected relevant literature compiled it is a document with the nature of the procedure can be used as a guide to the work of hydrogeological observation.Xi Metallurgical Department of the system of all hydrogeologists on this document Good learning and discussion, combined with the actual work, put forward specific comments in order to amend the reference. "Comrade Maslov spent a lot of time and effort to collect a wealth of information compiled on this document, we are only here With my heartfelt thanks.
其他文献
◆如果一个小个子继续表演着他的过人技术然后上篮结果三不沾,那他是弗朗西斯;◆如果发力并且没扣进去,那他是2003年全明星赛上的乔丹;◆如果上篮没进去并独自一人顺势倒下并
China visit marks Egyptian leader’s more balanced foreign policy approach and new economic alliances Egypt’s president Mohamed Morsi was accompanied by more t
目前,我厂在加工安全罩时使用如图夹具进行夹固。在没有此工具前,生产率低,加工困难,不能用大走刀量,且由于铸件孔偏心,在加工时容易车穿。废品率达1/3。采用此夹具后,不仅
丝杠在机械制造中的应用是很广泛的,许多机器都或多或少用到丝杠在机床制造中丝杠更是它的关键性零件之一但过去丝杠生产多是用切削的办法,这样做即浪费很多金属,而且生产率
北京‘苏联展览馆’内,有一台2430型座标镗床,这个镗床主轴上所用的镗杆,备有微量调整进刀的装置。利用这种镗杆,可以保证刀头的切削深度精密到0.01公厘。下面是镗刀的结构
我厂是生产各种刀具和非标刀具的专业厂,图1所示是花键轴铣刀,以往一直在铲齿机床上铲背制成。由于成形铣刀自身的光洁度较差,铣刀的加工表面光洁度达不到设计要求,造成多次
The complex of (La(DAPSC)(NO3)3 H2O) · H2O was prepared. Its crystal data are: triclinic, space group P- , a =8.736(1), b = 12.108(3), c =12.412(3)(A) , α=11
INTRODUCTION. The volcanic rocks in Pei Piao region have been already noticed by different authors. They were, however, only stratigraphically classified into
一、引言河北省北部地区,在震旦系上部雾迷山白云岩与燕山期花崗閃长岩接触处,普遍发生有接触变貭現象——矽嘎岩化;伴随这种变貭作用,常常有接触交代矿床产生,如寿王坆銅矿
对13种切削液及干式拉削的效果、拉刀前角、后角、以及刀齿前面和后面的粗糙度对拉削表面粗糙度的影响进行了试验,并得出了相应的结论。
The effects of 13 kinds of cuttin