论文部分内容阅读
家中需要添置水盆,而市场上一时又无货可买,这时不妨自己动手做一个钢筋混凝土水盆。如按常规做法,不但费模板,而且拆模后,表面粉饰也不容易做,尤其是阴、阳角,更不容易做平直。但如果按本文所介绍的方法——平面预制、弯起成型和二次浇捣法制作,既省模板,又免去了表面粉饰,省工省料,可以收到事半功倍的效果。水盆制作方法如下:1.找一块平整的场地,用废旧报纸接略大于图1所示的外包尺寸铺好,作为捣制混凝土的隔离层。
If you need to buy a basin in your home, and the market is not available for purchase at the moment, you may wish to create a reinforced concrete basin yourself. According to conventional practice, not only the template, but after the removal of the mold, the surface finish is not easy to do, especially the Yin and Yang angles, but also less easy to do straight. However, according to the method described in this article - plane prefabrication, bending and secondary casting method, not only save the template, but also eliminates the surface of the whitewash, save labor and materials, you can receive a multiplier effect. The production method of the water basin is as follows: 1. Find a flat site, use the waste newspaper to be larger than the outer size shown in Fig. 1, and lay it out as a barrier for concrete.