论文部分内容阅读
路面铣刨机的某些辅助装置可以提高施工效率,使操作人员作业时感到舒适。本文介绍铣刨机喷水装置和驾驶棚的改进方法。1.喷水装置铣刨机喷水装置用于减少铣刨作业时产生的烟尘,并可对铣刨转子上的刀头进行冷却和清洗。(1)存在问题传统铣刨机铣刨室内的喷水装置只设有1排喷水孔,在孔上安装喷嘴,用1根水管将喷嘴连接,喷嘴对准铣刨转子,向刀头喷水清洗、冷却。该种喷洒方法喷洒范围小,喷出的水雾无法将铣刨室内的灰尘吸附,降尘及清洗效果较差,部分灰尘依然能够从铣刨室出料口排出。(2)改进方法
Some of the pavement moulders’ assistive devices increase the efficiency of construction and make the operator feel comfortable while working. This article describes improvements to the sprinkler and cabins of a milling machine. 1. Spraying device Planer Spraying device is used to reduce dust generated during milling operation, and cooling and cleaning the cutter head on the milling rotor. (1) existing problems Milling machine milling machine room with only one row of water jet nozzle, the nozzle installed in the hole, with a nozzle to connect the nozzle, the nozzle aligned milling rotor, the nozzle spray Water cleaning, cooling. This kind of spraying method has a small spraying range, and the spray mist can not adsorb the dust in the milling chamber. The dust removing and cleaning effect is poor, and part of the dust can still be discharged from the discharging port of the milling chamber. (2) improve the method