A modified single melt technique involving joint charging was developed for preparation of aluminum bronze,Cu-14%Al-X(mass fraction) alloy, which could be used
Powder phosphor of Sr2CeO4 is prepared by microemulsion-heating method and a film of the phosphor on ITO glass is formed by electrophoretic deposition. Field em
The effects of silicocalcium on the microstructure and mechanical properties of casting magnesium alloy Mg-6Al-0.5Mn(AM60) were studied. The results show that t
The reverse martensitic transformation of TiNi alloy wires prestrained in the parent phase was studied. Experimental results show that the reverse transformatio
Cerium-doped titanium dioxide nano-powders were prepared through the sol-gel method and the compound samples were characterized by X-ray diffraction (XRD), tran
The liquid quenching method was adopted to study the solidification morphology and microstructure of AZ91D Mg alloy in semisolid. The results indicate that cool
The interfacial phenomena of the Sn-Pb solder droplet on Au/Ni/Cu pad are investigated. A continuous AuSn2and needle-like AuSn4 are formed at the interface afte
The phases and magnetocaloric effect in the alloys Tb (Co1 - xSnx) 2 with x = 0, 0.025, 0.050, 0.075, 0.100were investigated by X-ray diffraction analysis and m