论文部分内容阅读
自全自动机械式板线材成型机从台湾引进国内后,小于1mm的板材、3mm的线材成型模具开发成本不断减少,板线材自动成型机利用冲床及滑座进行多角度折弯加工,在相关的滑座上设计相应的折弯模具即可完成整套模具的设计与制造,如需进行冲裁,则需要设计相关的冲压模具,与传统的连续模具相比,大大减少了模具开发成本。
Since the automatic mechanical plate and wire forming machine from Taiwan after the introduction of less than 1mm sheet metal, 3mm wire forming molds continue to reduce the cost of development, plate and wire automatic molding machine using the press and slide for multi-angle bending, in the relevant The design of the corresponding bending mold on the sliding seat can complete the design and manufacture of the complete mold. If punching is required, the related stamping mold needs to be designed. Compared with the traditional continuous mold, the mold development cost is greatly reduced.