论文部分内容阅读
单相电动节能水泵用电省、效率高、密封性能强,是用户喜爱的产品,现将其使用方法介绍如下。 1.使用前,检查电机是否受潮,电路是否完好无损,机械部分是否卡死或松动,如有异常现象,应排除后方可使用。 2.连接电源芯线,并通过10A单相闸刀开关接在电源的主干线上,切忌直接插入灯头 3.水泵应安装在大于电机底脚10厘米的铁架或木板上,电机应接入可靠的地线。 4.选用相应口径的胶水管,吸水管一端接上底阀,另一端与水泵的进水口接牢,然后以泵的出水口向泵内灌水。同
Single-phase electric energy-saving pump power province, high efficiency, strong sealing performance, is the user favorite products, now its use as described below. 1 before use, check whether the motor is damp, the circuit is intact, the mechanical part is stuck or loose, if abnormal phenomena, should be excluded before use. 2. Connect the power cord, and through the 10A single-phase knife switch connected to the power of the trunk line, should not be directly inserted into the lamp 3. Pump should be installed at 10 cm above the motor foot iron or wood, the motor should be connected Reliable ground wire. 4. Select the appropriate diameter of the glue pipe, one end of the suction pipe connected to the end of the valve, the other end connected with the pump inlet firmly, and then to the pump outlet to the pump irrigation. with