论文部分内容阅读
一般内圆磨床在修整砂轮时要停车安装修整器,用螺钉把修整器与工作台紧固,金刚占笔固定在支架上,支架在底座上作前后调整,依靠工作台的纵向运动和砂轮架的横向进给,修整砂轮的外圆。待修整好后要卸下修整器,再进行磨削加工,装卸工作十分繁琐。我厂自行设计一种内磨不停车砂轮修整器(见图)。使用时,只要把金刚占笔支架放下,用螺钉紧固后即可使用。用毕后翻起支架,有弹簧自锁装置锁紧,就可直接磨削工件。使用方便灵活,对内圆磨削提高效率起到极其重要的作用。而且,在金刚占头处装
General internal grinder dressing dressing wheel to install the dresser, the dresser and the table with a screw fastening, diamond pens fixed to the bracket, the bracket on the base for the front and rear adjustments, relying on the longitudinal movement of the table and the wheel frame The horizontal feed, dressing wheel outer circle. To be trimmed to remove the dresser, and then grinding, loading and unloading work is very cumbersome. I plant a self-designed wheel grinding wheel dresser (see photo). Use, as long as the King Kong accounted for pen holder down, with the screw can be used after the fastening. After use, turn up the bracket, a spring self-locking device locking, you can directly ground the workpiece. Easy to use and flexible, improve the efficiency of the internal grinding played an extremely important role. And, in diamond occupy the head