论文部分内容阅读
(一)原料纯松香(为了避免钝松香的脆性,可加少许白軟蜡,比例为9克松香1克蠟即可,但不如纯松香的义眼透明)、细鉄丝、油色、石膏、油等。 (二)用具酒精灯、轻鉄锅、天平等。 (三)制作方法 (1)首先要照玻璃义眼或玻璃球制好石膏模子,或准备好玻璃板;(2)用软蜡加黑颜色用手揑成小球,中插以盤头鉄丝(或用大头针,作为瞳孔部分;(3)将纯松香或已调配好的松香与軟蜡,放在轻鉄锅中加热,侍完全熔化为止;(4)将已做好的模子用毛笔(?)油刷一下,以防止义眼制成时不易取下,但用水浸过的模子亦可;(5)将已熔好的松香液或松香軟蜡液倒入模子中,然後将已做好的黑色蜡球插在中央,待冷後取下,将周边修理一下,最後再在已熔的液体中以快速度(?)一下,这样可使眼面具有光泽。另一法是将已熔的液体滴於玻璃板上,冷後取下,在其背面涂以油色即可应用。如先在白纸上画好黑点,再滴液体於纸上,冷後剪下亦可应用。
(A) raw material rosin (in order to avoid the blunt rosin fragility, add a little soft white wax, the proportion of 9 grams of rosin can be 1 g wax, but not as rosy transparent eye), fine reeling wire, oil color, gypsum , Oil and so on. (B) appliances alcohol lamp, light pan, balance and so on. (C) the production method (1) first of all according to the glass or eye glass prosthetic gypsum mold, or prepared glass; (2) with soft wax plus black color hand-pinched into a ball, inserted in the pan head 鉄Silk (or pin, as the pupil part; (3) the pure rosin or rosin has been deployed with a good soft wax, put it in a light pan heat, wait until completely melted so far; (4) the mold has been done with a brush (?) Oil brush to prevent the eye is not easy to remove when made, but with water-immersed mold can be; (5) the melted rosin or rosin soft wax solution into the mold, and then Well done black wax ball inserted in the central, to be removed after the cold, the surrounding repair, and finally again in the molten liquid at a fast speed (?) Look, so that the eye has a glossy. The other method is to Melted liquid drops on the glass plate, after the cold removed, painted on the back of the oil can be applied to the first black paper on a black dot, and then drop the liquid on the paper, cut off after the cold can application.